Proceedings Twenty-Ninth Annual Symposium

Incremental Motion Control Systems & Devices

Editor: Benjamin C. Kuo and Dennis Lieu


Paperback: 324 pages, 2000
Publisher: Incremental Motion Control Systems Society

    CONTENTS

  1. M. Sakamoto, CASCADE TYPE 3-PHASE CLAW POLE STEPPING MOTOR.

  2. M. O. Andre, DIRECT-DRIVE ROTARY ACTUATOR WITH A PERMANENT MAGNET EMBEDDED7 IN A FERROh4AGNETIC ROTOR.

  3. J.C.LiII1,S.Y.Jung,D.H.Ch0,and H. K. Jung, DESIGN OF Z-THETA MOTION MOTOR USING SPACE HARMONIC METHOD AND  NICHING GENETIC ALGORITHM.

  4. T. TaKura and Y. Tanabe, NEW STRUCTURAL MICROCONTROLLER-MOTOR-PUMP AND ITS CHARACTERISTICS.

  5. C. Koechli and M.Jufer, DESIGN OF A SINGLE PHASE SYNCHRONOUS MOTOR WITH EXTERNAL ROTOR.

  6. D. R. James, S. R. Prina, and B. K. Fussell, HYDRAULIC SERVOVALVE MOTOR DESIGN.

  7. J. M. Calico, SERVOMOTOR OPTIMIZATION FOR COST,SIZE,AND MECHANICAL TIME
     CONSTANT.

  8. T. Y. Yoon and D. K. Lieu,THE INFLUENCE OF MAGNETIZATION PATTERN IN A  CONTINUOUSl RING MAGNET ON MOTOR PERFORMANCE.

  9. C.P.Ch0,W.Wylam,and R.Johnston, THE INTEGRATED STARTER ALTERNATOR DAMPER:THE FIRST STEP TOWARD HYBRID ELECTRIC VEHICLES.

  10. D.Y.Ohm, ANATOMY OF SPACE VECTOR PULSE WIDTH MODULATION
    TECHNIQUES.

  11. Y.AKiYama,MULTI SYNCHRONOUS MOTOR DRIVE WITH ONE INVERTER9
    AND A PILOT MOTOR SET
    .

  12. F.BOIlvin and Y.Perriard,SENSORLESS POSITION DETECTION AND SINUSOIDAL SUPPLY 
    FOR SMALL BRUSHLESS DC MOTOR
    .

  13. Y.Perriard and L. Cardoletti, SENSORLESS CONTROL COMPARISON FOR A BRUSHLESS DC MOTORAPPLICATION TO NOISE REDUCTION.

  14. J.R.Andrews, MOTION MERGING AND OTHER SINGLE AXIS CONTROL CHALLENGES.

  15. A.C. LeerIhouts , TORQUE RIPPLE  IN MICROSTEPPING SYSTEMS.

  16. M.Crivii,M.Jlifer,W.Wyss,and E Favre, VARIABLE RELUCTANCE RESOLVER MODELISATION AND13 ANGULAR POSITION ERROR DETECTION.

  17. G.F.Elvis,J.Durrant,and G.Singh, MODELLING  AND AUTOMATIC SELECTION OF GEARBOXES IN SERVO SYSTEMS.

  18. M.kouhei and k.Takatlashi, DEVELOPMENT OF A CONTROLLER IC FOR A FIVE PHASE
    STEPPING MOTOR.

  19. K.MuttmkumaLS.K.Sinha,K.Gopakumar,L Umanand, MODELLING  AND SIMULATION OF SENSORLESS VECTOR CONTROL OF HYBRID STEP MOTOR.

  20. K.Muttllikumar and S.K.Sinha, IMPLEMENTATION OF SENSORLESS VECTOR CONTROL OF HYBRID STEP MOTOR USING DSP.

  21. T. Lin and R. Lin, SPECIAL WINDING DESIGN FOR HYBRID STEP MOTOR.

  22. T. Y. Chllang and D. K. Lieu, OPTIMIZED CURRENT WAVEFORMS FOR SWITCHED RELUCTANCE MOTORS.

  23. G. P. Widdows OIL, O.Gang, H. Y. Jiang, and H. L. Chua, AUTOMATIC FORCE CONSTANT TESTING SYSTEM FOR TEREE-PHASE LINEAR MOTORS.

  24. C. W. Tseng, J. Y. Sherl, C. P. R. Ku, and  I. Y. Shen, VIBRATION OF DISK DRIVE SPINDLE MOTORS AT ELEVATED TEMPERATURES.

  25. ShM. Hwang, T. J. KiII, and N. G. Park, EFFECT OF ROTOR MISALIGNMENT AT AIRGAP ON DYNAMIC19 RESPONSES OF ECCENTRIC ROTORS. 

  26. S. M. Hwang and K. T. Park, COMPARISON OF VIBRATION SOURCES BETWEEN SYMMETRIC AND ASYMMETRIC HDD SPINDLE MOTORS WITH ROTOR ECCENTRICITy.

  27. G. H. Jang and J. H. Charlg, ANALYSIS OF ELECTROMECHANICAL-COUPLED FIELD IN A
    BRUSHLESS DC MOTOR.

  28. A. Hartman and W. Lorimer, COGGING TORQUE CONTROL IN BRUSHLESS DC MOTORS.

  29. A. Cassat, M. Aiai, N. Wavre, C. Espanet, and M. Jufer, THERMAL SCHEME AND IRON LOSSES DETERMINATION OF BLDC MOTORS AT HIGH SYNCHRONOUS FREQUENCIES.

  30. GD Neal,J.M. Finan, and D.K. Lieu, CERAMIC THERMOPLASTIC ENCAPSULATION AS A DESIGN FEATURE IN A BLDC MOTOR IN A DISK DRIVE.

  31. G.J.Bennett, VOLTAGE FEEDFORARD -A VIABLE PRECISION CONTROL TECHNIQUE.

  32. G.J.Bennet, BRUSHLESS MOTOR POWER CONTROL-WITHOUT POWER.

  33. R.Codilian and S. K. Woo, VOICE COIL MOTOR THERMAL RESISTANCE IN HARD DISK DRIVES.

  34. R.Codilian and S.k. Woo, THERMAL RISE PREDICTION AND AN INNOVATIVE APPROACH OF SENSING TEMPERATURE RISE IN VOICE COIL MOTORS.

  35. D.Jones, THE IMPACT OF DIFFERENT WINDING CONFIGURATIONS ON BRUSHLESS PM MOTOR PERFORMANCE.


Copyright © 1998-2000 by PEMCLAB, NCTU, TAIWAN