課程名稱交換式電源供應器設計 (Switching Power Supply Design) 【永久課號:ICN5634
授課老師鄒應嶼 教授  [Prof. Ying-Yu Tzou]  (研究室EE713, 分機:31697)

課程講義

【課程講義】SPS設計 part-1 basics (2020-03-06) 

 

作業

 

作業內容

出題時間

繳交期限

備註

 

   

 

 

 

 

 

 

        ※作業請於繳交期限前e-mail至課程助教。(Please mail the PDF file of HW to the teaching assistant before deadline.)

        ※若有任何疑問請與助教聯繫。(Please contact TA by e-mail if you have any problem about HW submission.)

        課程助教(Teaching assistant): 洪仲德
        助教實驗室:EE808 分機54413  E-mail: imdanny.com@gmail.com

學分數:3(研究所選修

先修科目或先備能力

基本電學、電子學、控制理論、電力電子導論或相關課程

課程概述與目標

隨著各種資訊與通訊設備的快速發展與廣泛應用,高效率電源供應器已成為每一個電子產品不可或缺的重要組件,電源供應器的設計與電源管理已成為電子產品系統設計的一部份,有鑑於電源供應器的在系統整合設計的重要性,本課程介紹交換式電源供應器的理論基礎與實務應用,培養交換式電源供應器的系統化設計與分析能力,經由系統化的設計方法,瞭解交換式電源供應器的設計與系統整合。課程目標著重於從基本的DC-DC轉換器理論,建立以電腦模擬為基礎的開關式電源供應器系統化分析與設計方法。

課程綱要

 

周次

內容綱要

1

Introduction to DC-DC Converters

2

Switching Power Supply Design Basics

3

Control Architectures for Switching Power Converters

4

Small Signal Modeling and Computer Simulation

5 Feedback and Control Loops (1)
6 Feedback and Control Loops (2)
7 Basic Blocks and Generic Switched Models (1)
8 Basic Blocks and Generic Switched Models (2)
9 Middle Term Report
10 Simulations and Practical Designs of Nonisolated Converters (1)
11 Simulations and Practical Designs of Nonisolated Converters (2)
12 The PFC Converters (1)
13 The PFC Converters (2)
14 Practical Designs of Flyback Converters (1)
15 Practical Designs of Flyback Converters (2)
16 Practical Designs of Flyback Converters (3)
17 Final Term Report (1)
18 Final Term Report (2)

 

教學要點概述

一、學期作業

1. Waveform Analysis of a Buck Converter
2. Simulation of Dynamic Response of a Buck Converter
3. Control Loop Design of a Synchronous Buck Converter
4. Simulation of Dynamic Response of a Flyback Converter
5. Control Loop Design of a Synchronous Flyback Converter
6. Term Report

二、考試狀況

1. Midterm Term Report (Presentation)
2. Final Term Report (Presentation)

參考書目

  1. Switch-Mode Power Supply SPICE Simulations and Practical Designs, Christophe Basso, McGraw-Hill, 2008.

  2. Switching Power Supply Design & Optimization, Sanjaya Maniktala, McGraw Hill, May 2004.

課程進行方式、課程要求及評分標準

  • 上課時間:週五上午9:00~12:00

  • 成績計算:作業60%、期中報告20%、期末報告20%.

  • 修課態度:主動發問(列入成績加分)、準時上課、準時繳交作業。

 

Last Update: 2020/03/19

Copyright © 2010 by 808-PowerLab, NCTU, TAIWAN, All Rights Reserved.